Enjoy a flat 50% OFF on Valves, Tubings and Air Source Treatment. Shop now!
Latest Products
Sort by
Show result
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM1.00
  • Double-acting round cylinder
  • Including flexible cushioning rings/pads at both ends and via proximity sensor
  • Temperature: -20 °C ~ 80 °C
  • Pressure: 1 - 10 bar
  • Bore Size: 25mm
  • Stroke: 125mm
  • Pneumatic Connection: G1/8"
  • Piston Rod Thread: M10x1.25
  • Medium: Compressed Air
  • Material: High Alloy Stainless Steel
RM250.00
RM500.00
  • Pre Order: 2-3 Days
  • Nominal Pressure: PN16
  • Working Temperature: -15°C~120°C
  • Suitable Mediums: Fresh water, sewerage, sea water, air, steam, oils, acids, alkalines, salt, etc


 

RM170.00
RM235.00
  • Fluid: 40 micron filtered air
  • Operation: Direct drive type
  • Operating pressure: 0~0.8MPa
  • Prrof pressure: 1.2MPa
  • Power consumption: AC220V
  • Electrical entry: Lead wire or connector type
  • Material of body: Aluminum alloy
  • Highest action frequency: 10 cycle / second
  • Coil insulation: Class F
  • Shortest excitation time: 0.05 second

 

RM95.00
RM130.00
  • Y Strainer Size: 1/2"
  • Material: Brass
  • Pressure: High Pressure (0 - 10 Bar)
  • Temperature of Media: Low Temperature
  • Media: Water
  • Power: Solenoid
  • Standard or Nonstandard: Standard
  • Type: Normal Close or Normal Open
  • Media: Water/ Gas
RM200.00
RM350.00
  • Material: Brass
  • Thread Size: 1/4" Male to Male Thread
  • Pipe Interface: 8mm
  • Regulate and control air, oil and water
RM6.00
RM10.00
  • After opening the package, please store the untapped cable ties sealed.
  • If exposed, it will lead to water loss and will easily break
  • Adjustable, reusable and durable
  • Recommended temperature: 5 to 60℃
  • Stable quality and low insertion
RM29.00
RM40.00
  • Transparent Bowl
  • Can be used with AC2000, AFC2000, AFR2000, BC2000, BC3000, BC4000, BF2000, BF3000, BF4000,BFC2000, BFC3000, BFC4000, BFR2000, BFR3000, BFR4000, 

 

RM19.00
RM38.00
  • Transparent Bowl
  • Can be used with AL2000, BL2000, BL3000, BL4000, BC2000, BC3000, BC4000,BFC2000, BFC3000 & BFC4000 filters

 

RM19.00
RM38.00
  • Angle: 40 degree (BS1010), 45 degrees (BK3010), 60 degrees (BS2010)
  • Blade Hardness: 62-64Rc (BS1010, BK3010, BS2010)
  • Suitable for: PVC, hard plastic and iron
  • Machining position: the circular hole edge, straight edge, curved edges (Not suitable for outer edges, flat)

 

RM40.00
RM50.00

• Size : 10mm
• Triple chrome plated.
• Best for professional use.

RM13.00
RM15.00
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM3.80
RM6.75
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM3.00
RM5.15
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM1.70
RM3.20
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM1.20
RM1.75
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM0.70
RM1.25
  • Angle: 40 degree (BS1010), 45 degrees (BK3010), 60 degrees (BS2010)
  • Blade Hardness: 62-64Rc (BS1010, BK3010, BS2010)
  • Suitable for: PVC, hard plastic and iron
  • Machining position: the circular hole edge, straight edge, curved edges (Not suitable for outer edges, flat)

 

RM70.00
RM90.00
  • Operating fluid: Air
  • Filtering Eliment Roughness: 20μm or 40μm
  • Range of adjustable pressure: 0.15 - 3.5MPa
  • Max Input Pressure: 4MPa
  • Operating temperature range: 5 - 80 Celcius
RM475.00
RM950.00
  • Medium: Compressed air
  • Mounting type: Pipe mounting or foot mounting
  • Assembly position: ±5
  • Primary pressure: Manual condensate drain= 1~16bar
  • Min. standard nominal flow rate: 3L/min
  • Capacity of condensate fluid: 22ml
  • Temperature range: 0~60°C
  • Port Size: G1/8" G1/4" G3/8"
  • Working Pressure: 12 bar
  • Grade of filtration: 5µm
RM222.50
RM445.00
  • Medium: Compressed air
  • Mounting type: Pipe mounting or foot mounting
  • Assembly position: Vertical ±5
  • Primary pressure: 1~16bar
  • Max. condensate capacity: 22ml
  • Temperature range: 0~60°C
  • Grade of filtration: 5µm
RM95.00
RM190.00
  • Medium: Compressed air
  • Mounting type: Pipe mounting or foot mounting
  • Assembly position: Vertical ±5
  • Primary pressure: 1~16bar
  • Max. condensate capacity: 22ml
  • Temperature range: 0~60°C
  • Grade of filtration: 5µm
RM95.00
RM190.00
  • Medium: Filtered, compressed air(lubricated or unlubricated)
  • Mounting type: Pipe/foot/Plate mounting
  • Assembly position: Any
  • Primary pressure: 1~16bar
  • Working pressure: 12 bar
  • Temperature range: 0~60°C
  • Port Size: G1/8" G1/4" G3/8"
RM115.00
RM230.00
  • Medium: Compressed air
  • Mounting type: Pipe mounting or foot mounting
  • Assembly position: ±5
  • Primary pressure: Manual condensate drain= 1~16bar
  • Min. standard nominal flow rate: 3L/min
  • Capacity of condensate fluid: 22ml
  • Temperature range: 0~60°C
  • Port Size: G1/8" G1/4" G3/8"
  • Working Pressure: 7bar
  • Grade of filtration: 5µm
RM172.50
RM345.00
  • Medium: Compressed air
  • Mounting type: Pipe mounting or foot mounting
  • Assembly position: Vertical ±5
  • Primary pressure:1~16bar
  • Max. condensate capacity: 22ml
  • Temperature range: 0~60°C
  • Grade of filtration: 40µm
RM68.00
RM136.00
  • Highest Working Pressure: 1.0MPa
  • Ensured Pressure Resistance: 1.5MPa
  • Operating Temperature Range: 5~60°C
  • Recommended Oil Use: ISO VG 32
  • Container Material: Polycarbonate
  • Protective Cover: Not Available
  • Flow Rate: 800 L/min
RM27.50
RM55.00
  • Filter Precision: 25µ
  • Highest Working Pressure: 1.0MPa
  • Ensured Pressure Resistance: 1.5MPa
  • Operating Temperature Range: 5~60°C
  • Container Material: Polycarbonate
  • Protective Cover: Not Available
  • Flow Rate: 750 L/min
  • Drain Type: Manual
RM27.50
RM55.00
  • Filter Precision: 25µ
  • Highest Working Pressure: 1.0MPa
  • Ensured Pressure Resistance: 1.5MPa
  • Operating Temperature Range: 5~60°C
  • Range of Adjustable Pressure: 0.05~0.85Mpa
  • Recommended Oil Use: ISO VG 32
  • Container Material: Polycarbonate
  • Protective Cover: Not Available
  • Port Size: G1/4"
  • Flow Rate: 500 L/min
  • Drain Type: Manual
RM90.00
RM180.00
  • Filter Precision: 25µ
  • Highest Working Pressure: 1.0MPa
  • Ensured Pressure Resistance: 1.5MPa
  • Operating Temperature Range: 5~60°C
  • Range of Adjustable Pressure: 0.05~0.85Mpa
  • Recommended Oil Use: ISO VG 32
  • Container Material: Polycarbonate
  • Protective Cover: Not Available
  • Port Size: G1/4"
  • Flow Rate: 500 L/min
  • Drain Type: Manual
RM77.50
RM155.00
  • Filter Precision: 25µ
  • Highest Working Pressure: 1.0MPa
  • Ensured Pressure Resistance: 1.5MPa
  • Operating Temperature Range: 5~60°C
  • Range of Adjustable Pressure: 0.05~0.85Mpa
  • Container Material: Polycarbonate
  • Protective Cover: Not Available
  • Flow Rate: 550 L/min
  • Drain Type: Manual
RM50.00
RM100.00
  • Highest Working Pressure: 1.0MPa
  • Ensured Pressure Resistance: 1.5MPa
  • Operating Temperature Range: 5~60°C
  • Range of Adjustable Pressure: 0.05~0.85Mpa
  • Port Size: G1/4"
  • Flow Rate: 550 L/min
RM35.00
RM70.00
  • Working pressure: 0.15MP~0.8MPa
  • Fluid: Air
  • Proof Pressure: 1.5MPa (215Psi)
  • Temperature Range: -20~70°C
RM21.50
RM43.00
  • Working pressure: 0.15MP~1.0MPa
  • Fluid: Air
  • Temperature Range: -20~70°C
  • Recommended Lubrication Oil: ISO VG 32 or equivalent
  • Port Size: 1/4"
  • Capacity of Oil Bowl: 25CC
RM19.00
RM38.00
  • Max. Working Pressure 1.0Mpa (9.9kgf/cm)
  • Fluid: Air
  • Filtering Grade: 40µm
  • Temperature Range: -20~70°C
  • Capacity of Drain Bowl: 15CC

 

RM19.00
RM38.00
  • Working pressure: 0.15MP~0.8MPa
  • Fluid: Air
  • Filtering Grade: 40µm
  • Temperature Range: -20~70°C
  • Recommended Lubrication Oil: ISO VG 32 or equivalent
  • Port Size: 1/4"
  • Capacity of Drain Bowl: 15CC
  • Capacity of Oil Bowl: 25CC

 

RM46.00
RM92.00
  • Working pressure: 0.15MP~0.8MPa
  • Max. Pressure: 1.0MPa(145Psi)
  • Fluid: Air
  • Filtering Grade: 40µm
  • Temperature Range: -20~70°C
  • Recommended Lubrication Oil: ISO VG 32 or equivalent
  • Capacity of Drain Bowl: 15CC
  • Capacity of Oil Bowl: 25CC
RM65.00
RM130.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM10.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM20.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM5.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM35.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM5.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM16.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM3.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM5.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM2.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM5.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM2.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM5.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM5.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM5.00
  • Effectively block visible objects such as droplets
  • Filter non-oily particles in the air
  • Absorbs exhaled heat, leaving skin dry and comfortable 
  • 100% Brand new and high quality
  • Safe and breathable.
  • Provide protection against dust and particles
  • Suitable for both professional salon or home use
RM100.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM10.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM5.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM5.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM5.00
  • Brand: SWISH
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM5.50
RM7.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM5.00
  • Brand: SWISH
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM5.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM5.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM5.00
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design to connect the tube and provide secure connection with no extra sealing
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air, Water, Vacuum
  • Pressure: 0 - 1(Mpa) Max
  • Warranty Type: No warranty
RM5.00
  • Operating Pressure: 0.2 - 0.8 MPa
  • Temperature: -5~+50°C (No freezing)
  • Material: Aluminum alloy
  • Response time: 30ms

 

RM39.00
RM78.00
  • Operating Pressure: 0.2 - 0.8 MPa
  • Temperature: -5~+50°C (No freezing)
  • Material: Aluminum alloy
  • Response time: 30ms

 

RM39.00
RM78.00
  • Operating Pressure: 0.2 - 0.8 MPa
  • Temperature: -5~+50°C (No freezing)
  • Material: Aluminum alloy
  • Response time: 30ms

 

RM39.00
RM78.00
  • Brand: No brand
  • Material: Plastic, durable and reusable
  • Type: 6mm Push In Multiple Tee Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Elliptical release ring help to connect the tube easily by manual with no special tools required
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm Push In Multiple Tee Quick Fittings
  • Only the above package content, other products are not included.
RM6.90
  • Brand: No brand
  • Material: Plastic, durable and reusable
  • Type: 12mm to 6mm Unequal Union Push in Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Elliptical release ring help to connect the tube easily by manual with no special tools required
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 12mm to 6mm Unequal Union Push in Quick Fittings
  • Only the above package content, other products are not included.
RM4.70

Wire Length: 2metres

Voltage: 12-DC24V

RM200.00
RM400.00
  • Service application : Water, Air, Oil, Gas
  • The standard product fluid temperature: 80°C
  • Function type: Normally Closed (N/C)
  • Temperature: -5 - 80°C
  • Pressure: 0 - 10bar
  • Valve Material : Stainless steel valve
RM170.00
RM340.00
  • Water Solenoid valve.
  • Adopting straight-action diaphragm structure without pressure starting enlarges its applicable scopes.
  • Adopting plate diaphragm structure with reliable start and close lengthens the service life of the product.
  • Service application : Water, Air, Oil, Gas
  • The standard product fluid temperature: 80°C
  • Function type: Normally Closed (N/C)
  • Temperature: -5 - 80°C
  • Pressure: 0 - 10bar
  • Valve Material : Stainless steel valve
RM254.00
RM508.00
  • Water Solenoid valve.
  • Adopting straight-action diaphragm structure without pressure starting enlarges its applicable scopes.
  • Adopting plate diaphragm structure with reliable start and close lengthens the service life of the product.
  • Service application : Water, Air, Oil, Gas
  • The standard product fluid temperature: 80°C
  • Function type: Normally Closed (N/C)
  • Temperature: -5 - 80°C
  • Pressure: 0 - 10bar
  • Valve Material : Stainless steel valve
RM254.00
RM508.00
  • Water Solenoid valve.
  • Adopting straight-action diaphragm structure without pressure starting enlarges its applicable scopes.
  • Adopting plate diaphragm structure with reliable start and close lengthens the service life of the product.
  • Service application : Water, Air, Oil, Gas
  • The standard product fluid temperature: 80°C
  • Function type: Normally Closed (N/C)
  • Temperature: -5 - 80°C
  • Pressure: 0 - 10bar
  • Valve Material : Stainless steel valve
RM254.00
RM508.00
  • Service application : Water, Air, Oil, Gas
  • The standard product fluid temperature: 80°C
  • Function type: Normally Closed (N/C)
  • Temperature: -5 - 80°C
  • Pressure: 0 - 10bar
  • Valve Material : Stainless steel valve
RM170.00
RM340.00
  • Service application : Water, Air, Oil, Gas
  • The standard product fluid temperature: 80°C
  • Function type: Normally Closed (N/C)
  • Temperature: -5 - 80°C
  • Pressure: 0 - 10bar
  • Valve Material : Stainless steel valve
RM170.00
RM340.00
  • Service application : Water, Air, Oil, Gas
  • The standard product fluid temperature: 80°C
  • Function type: Normally Closed (N/C)
  • Temperature: -5 - 80°C
  • Pressure: 0 - 10bar
  • Valve Material : Stainless steel valve
RM170.00
RM340.00
  • Service application : Water, Air, Oil, Gas
  • The standard product fluid temperature: 80°C
  • Function type: Normally Closed (N/C)
  • Temperature: -5 - 80°C
  • Pressure: 0 - 10bar
  • Valve Material : Stainless steel valve
RM170.00
RM340.00
  • Water Solenoid valve.
  • Adopting straight-action diaphragm structure without pressure starting enlarges its applicable scopes.
  • Adopting plate diaphragm structure with reliable start and close lengthens the service life of the product.
  • Service application : Water, Air, Oil, Gas
  • The standard product fluid temperature: 80°C
  • Function type: Normally Closed (N/C)
  • Temperature: -5 - 80°C
  • Pressure: 0 - 10bar
  • Valve Material : Stainless steel valve
RM315.00
  • Water Solenoid valve.
  • Adopting straight-action diaphragm structure without pressure starting enlarges its applicable scopes.
  • Adopting plate diaphragm structure with reliable start and close lengthens the service life of the product.
  • Service application : Water, Air, Oil, Gas
  • The standard product fluid temperature: 80°C
  • Function type: Normally Closed (N/C)
  • Temperature: -5 - 80°C
  • Pressure: 0 - 10bar
  • Valve Material : Stainless steel valve
RM315.00
  • Water Solenoid valve.
  • Adopting straight-action diaphragm structure without pressure starting enlarges its applicable scopes.
  • Adopting plate diaphragm structure with reliable start and close lengthens the service life of the product.
  • Service application : Water, Air, Oil, Gas
  • The standard product fluid temperature: 80°C
  • Function type: Normally Closed (N/C)
  • Temperature: -5 - 80°C
  • Pressure: 0 - 10bar
  • Valve Material : Stainless steel valve
RM315.00
  • Water Solenoid valve.
  • Adopting straight-action diaphragm structure without pressure starting enlarges its applicable scopes.
  • Adopting plate diaphragm structure with reliable start and close lengthens the service life of the product.
  • Service application : Water, Air, Oil, Gas
  • The standard product fluid temperature: 80°C
  • Function type: Normally Closed (N/C)
  • Temperature: -5 - 80°C
  • Pressure: 0 - 10bar
  • Valve Material : Stainless steel valve
RM290.00
  • Water Solenoid valve.
  • Adopting straight-action diaphragm structure without pressure starting enlarges its applicable scopes.
  • Adopting plate diaphragm structure with reliable start and close lengthens the service life of the product.
  • Service application : Water, Air, Oil, Gas
  • The standard product fluid temperature: 80°C
  • Function type: Normally Closed (N/C)
  • Temperature: -5 - 80°C
  • Pressure: 0 - 10bar
  • Valve Material : Stainless steel valve
RM290.00
  • Water Solenoid valve.
  • Adopting straight-action diaphragm structure without pressure starting enlarges its applicable scopes.
  • Adopting plate diaphragm structure with reliable start and close lengthens the service life of the product.
  • Service application : Water, Air, Oil, Gas
  • The standard product fluid temperature: 80°C
  • Function type: Normally Closed (N/C)
  • Temperature: -5 - 80°C
  • Pressure: 0 - 10bar
  • Valve Material : Stainless steel valve
RM145.00
RM290.00
  • Nominal Pressure: PN16
  • Working Temperature: -15°C~120°C
  • Suitable Mediums: Fresh water, sewerage, sea water, air, steam, oils, acids, alkalines, salt, etc


 

RM348.00
RM435.00
  • Ambient Operating Pressure: 16Bar
  • Operating Temperature: -10°C ~80°C
  • Vacuum Rating: 700 MM/HG
  • Applicable Fluids: Water, Warm Water, Sea Water, Air & Weak Acid
  • Flanges Standard: DIN, ANSI, JIS & BS
RM312.00
RM390.00
  • Ambient Operating Pressure: 16Bar
  • Operating Temperature: -10°C ~80°C
  • Vacuum Rating: 700 MM/HG
  • Applicable Fluids: Water, Warm Water, Sea Water, Air & Weak Acid
  • Flanges Standard: DIN, ANSI, JIS & BS
RM108.00
RM135.00
  • Double-Acting
  • Stroke: 15mm
  • Bore: 16mm
  • Pressure: 0.7 MPa
RM85.00
RM170.00
  • Double-Acting
  • Stroke: 20mm
  • Bore: 16mm
  • Pressure: 0.7 MPa
  • Ports: M5 x 0.8 (Rc 1/8)
RM90.00
RM180.00
  • Double-acting, Single Rod
  • Bore Size: 10mm
  • Application: Air
  • Max operating pressure: 0.7 MPa
  • Proof Pressure: 1 MPa
  • Temperature: -10°C ~ 60°C (With Auto Switch), -10°C ~ 70°C (Without Auto Switch)
RM120.00
  • Double-acting, Single Rod
  • Bore Size: 10mm
  • Application: Air
  • Max operating pressure: 0.7 MPa
  • Proof Pressure: 1 MPa
  • Temperature: -10°C ~ 60°C (With Auto Switch), -10°C ~ 70°C (Without Auto Switch)
RM120.00
  • Bore Size: 20mm
  • Stroke: 5mm
  • Medium: Air
  • Operating Pressure: 0.1~0.9MPa
  • Temperature: -5°C ~ 70°C
RM40.30
  • Bore Size: 32mm
  • Stroke: 20mm
  • Medium: Air
  • Operating Pressure: 0.1~0.9MPa
  • Temperature: -5°C ~ 70°C
RM57.80
  • Bore Size: 20mm
  • Stroke: 70mm
  • Medium: Air
  • Operating Pressure: 0.1~0.9MPa
  • Temperature: -5°C ~ 70°C
RM63.70
  • Bore Size: 20mm
  • Stroke: 20mm
  • Medium: Air
  • Operating Pressure: 0.1~0.9MPa
  • Temperature: -5°C ~ 70°C
RM44.50
  • Bore Size: 50mm
  • Stroke: 140mm
  • Medium: Air
  • Operating Pressure: 0.1~0.9MPa
  • Temperature: -5°C ~ 70°C
RM201.60
  • Bore Size: 16mm
  • Stroke: 75mm
  • Medium: Air
  • Operating Pressure: 1.35MPa
  • Temperature: -5°C ~ 70°C
RM48.48
RM60.60
  • Bore Size: 16mm
  • Stroke: 100mm
  • Medium: Air
  • Operating Pressure: 1.35MPa
  • Temperature: -5°C ~ 70°C
RM50.48
RM63.10
  • Bore Size: 20mm
  • Stroke: 25mm
  • Medium: Air
  • Operating Pressure: 1MPa
  • Temperature: -20°C ~ 70°C
RM48.24
RM60.30
  • Bore Size: 32mm
  • Stroke: 75mm
  • Medium: Air
  • Operating Pressure: 1MPa
  • Temperature: -20°C ~ 70°C
RM102.20
  • Bore Size: 25mm
  • Stroke: 25mm
  • Medium: Air
  • Operating Pressure: 1MPa
  • Temperature: -20°C ~ 70°C
RM66.90